Flat, bottle-shaped, red-brown wood double whistle bound with brown twine in three places, one near each end and one near the middle. Green-brown cloth is glued on the sides in between the holes. While the wider end is solid, there are two hollows through the tapering end where there is a taper cut rectangular hole nearby at either side.

Short stick wrapped with cedar bark shreds and bound in several places with green string; natural and red-dyed bark.

Large four-sided triangular-shaped wooden dagger that tapers to a pointed tip. Handle is embellished with a cedar fringe attached with two pieces of fibre cording.

Brown wood whistle that is square in cross section and bound in three sections with brown twine, two near each end and one near the middle. While the wider end is solid, there is one hollow through the smaller end where there is a taper cut semi-oval hole nearby on one side. Above the hole, a Dzunuk'wa head is carved and painted red while a teepee with a cross is carved underneath. On the other side, the letters 'NANDZT' and 'R' are carved lightly.

Brown wood double whistle made of two single whistles of equal length bound together by brown twine and beige cloth. Both pieces are circular in cross section and come to a tapering end and are bound in twine in three sections, two near the smaller end and one around the wider end, and in beige cloth in one section around the wider end. While the wider end is solid on each piece, there is a hollow (two in total) through the tapering end where there is a bordered taper cut semi-oval hole (two in total) painted in green nearby on the outward facing side.

Brown wood whistle that is square in cross section and comes to a tapering end and is bound in two places with brown string, one near each end. While the wider end is solid, there is a hollow through the tapering end where there is a taper cut rectangular hole nearby on one side.

Brown wood double whistle made of two single whistles of equal length bound together by brown twine. Both pieces are circular in cross section and are bound in three places with brown twine, one near each of the ends and one near the middle. While one end is solid on each piece, there is a hollow (two in total) through the the other end where there is a taper cut semi-oval hole (two in total) painted red nearby on one side. The letter 'A' is carved on one piece on the side opposite to that of the hole.

Brown wood double whistle made of two single whistles with one shorter than the other bound together by brown twine. Both pieces are oval in cross section and come to a tapering end and are bound in three places with brown twine, one near each of the ends and one near the middle. While the wider end is solid on each piece, there is a hollow (two in total) through the tapering end where there is a taper cut semi-oval hole (two in total) nearby on one side.

Brown double reed whistle that is square in cross section and bound in three sections with brown twine and cotton, two near each end and one near the middle. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut semi-oval hole nearby at either side. One side has the letter "A" carved.

Brown wood whistle that is rectangular in cross section and bound in three sections with brown string, two near each end and one near the middle. While the wider end is solid, there are two hollows through the smaller end where there are two taper cut rectangular holes painted red in opposite corners nearby on one side. On the opposite side, the letter 'A' is carved. Single whistle with two air vents to produce two tones.