Rectangular bentwood box with dark brown patina. Painted bird design in red and black on front panel. On opposite side are a series of vertical and slightly diagonal white lines.

Spoon cut from a single, narrow piece of bamboo; one end is bent and rounded to create the spoon's bowl.

Miniature village scene representing three figures. Two females are wearing skirts, one of which has a child on her back, and both of which are holding long wooden pestles, and have wooden mortars in front of them. These two women stand on one platform. A third figure is reclining on a separate platform nailed to the main base with this figure holding a child. Figures are all made with copper wire then wrapped into the shape with grasses, and nailed onto plain rectangular base.

Straight piece with a metal spike at top, forming reverse angle barb. Base of piece cut on diagonal and curves outwards with a lip on the outside.

Curved piece with a square metal spike at top, forming reverse angle barb. Base of piece is cut on diagonal with lip on outside.

Curved piece has metal spike forming reverse angle barb. Base of curved piece is cut on diagonal and has small lip.

Wood is bent in circle with overlapping ends which are drilled, tied, and nailed. Short wooden handle with notch on one end is lashed to hoop with cord. Skin is stretched tightly over hoop and wrapped with cord which sits in groove. String piece tied near handle.

Bentwood box, kerfs cut on both exterior and interior, fourth side pegged, now most pegs fallen away. Two shorter sides and one long side decorated each with panel of horizontal, finely chiseled grooves. Two smaller sides also have one vertical, rectangular area on right. These three panels are surrounded by border of vertical grooves. Remaining side is plain except for one vertical band of grooved diagonals down one edge. Base has split, leaving gap across width.

Undecorated bentwood box with kerfed corners, fourth corner nailed and horizontally pegged. Piece of newspaper stuck to interior wall near rim. The lid (part b), with an adzed surface, is thin and flat with one long edge projecting upwards on angle into large 'lip'. Lid has uneven fit.

Thin brown smooth-backed wood piece. Narrow rectangular wood platform has on top seven metal tongues (keys), once nine, evenly-spaced in a row, placed lengthwise to the wood piece, and held in place by a lateral bar wrapped in metal strips that are inserted into the wood piece through to the back. Length of knotted hide strung through two holes at same end. Large hole in the middle of the wood piece. Lateral bar inserted in the edge with two loosely-wrapped metal bands. Carved with a main geometric design consisting of four parallel horizontal bands, from top to bottom: diagonal lines, opposing diagonal lines, four double-outlined u-curves, and four upside down u forms with diagonals inside.