AMEC Analysis:Part: NeckOne white porcelain fragment from the base of an unknown object. Clear glazed. Brown accretions on top, bottom and exposed ceramic. L. Penttila 2/22/2010

AMEC Analysis: Part: Finish Comments: This piece appears to be part of a light fixture. One white glass fragment, possibly from a light fixture. Horizontal bands are visible, possibly tool marks from manufacture. One side has iridescence. Some brown/black accretions along exposed edges. L. Penttila 3/15/2010

AMEC Analysis:Part: FinishOne aqua glass fragment, possibly from a bottle. Brown accretions on exposed sides. Exterior surface covered with dried residue creating matte appearance. L. Penttila 3/15/2010

AMEC Analysis:Part: Canning Jar Lid/LinerOne brass object in the form of a closed loop. Object is bent out of original shape. Tarnish on interior and exterior surfaces. L. Penttila 3/1/2010

AMEC Analysis: Part: Whole Neck Finish: Prescription Technique: Hand-made cup bottom Comments: "586" is embossed on the base. Two clear glass bottle with prescription finish and salamander oval profile. Mold seams are 2 vertical seams running from cup-mold base to 1/4" below finish. Embossed Maker's Mark: 586 Grey/brown residue on interior and exterior with accretion of same on interior. Red/brown residue on interior. Some iridescence on exterior surface. L. Penttila 3/29/2010 Bottle was broken where the shoulder meets the neck during cataloging at the Burke Museum. Bottle was standing upright on a table when the table was bumped causing the bottle to fall over and break. K. Meyers 06/17/2010

AMEC Analysis: Part: Whole Neck Finish: Lipping Tool Decoration: Embossed One clear glass beverage bottle with round base and crown finish. Mold seams include: circular post-bottom mold seam on base and two vertical seam molds extending up to within 1/2" of bottom of finish. Embossed Maker's Mark on side: (Image of cat/fox reaching down to "x") FOX TRADE MARK J. G. FOX & CO. SEATTLE, WASH. (Back side, just above heel) 8 - S A B CO Fragment missing from finish/neck of bottle. Chips missing from rim and heel of bottle. Bubbles present in glass. Dried substance present on inside and outside of bottle. J. Dougherty 3/22/2010

AMEC Analysis: Part: Stopper Dates: 1920-1950 AMEC Analysis: Part: Stopper Dates: 1920-1950 Diagnostic Base Mark: Valve Mark Width: 2 1/8 Technique: Automatic Machine Comments: This bottle once contained some type of liniment. One white glass lid. Maker's Mark: 110 Unable to determine use or function of original bottle or years produced. Possible pontil scar on upper surface. Dried substance on all surfaces. Some iridescence, especially on interior. L. Penttila 2/1/2010

AMEC Analysis: Part: Whole Diagnostic Base Mark: Valve Mark Neck Finish: Automatic Machine Comments: This bottle once contained some type of liniment. One white (milk) glass medical bottle/jar, likely contained ointment. Round base with wide-mouth interrupted external thread finish. Dried substance present on inside and outside of bottle. Surface cracks on inside of bottle and on base, heel, and lower portion of body exterior. Interior has cracks in surface. J. Dougherty 03/22/2010

AMEC Analysis: Part: Whole Bottle Type: Vial/Test tube Neck Finish: Lipping Tool Manufacture Method: Hand-made cup bottom Comments: This bottle is an opium vial. One small clear glass bottle/vial. One visible mold seam extending from base to top of rim. Dried substance inside of bottle. J. Dougherty 3/22/2010

AMEC Analysis: Part: Whole Neck Finish: Lipping Tool One clear glass medical bottle with prescription finish. Base is similar to crown oval and monarch or erie oval bases with three straight sides and one curved side connected with rounded corners. Mold seams include: horizontal cup-bottom mold seam at heel with two side seams extending up to finish. Dried substance and some iridescence inside. Bubbles present in glass and one crack at shoulder approximately 2/3 inch in length. J. Dougherty 03/10/2010