Bone awl, triangular in shape with a tapered point at one end, a rectangular shaped body and a squared, flat end.

Bone tool, triangular in shape with a tapered, pointed tip and a squared end. The understide has a concaved groove and there are two square knobs along the side.

Set of seven game pieces (parts a-g) made from beaver teeth. The teeth have a natural colour of pink and cream. They are semi-circular in shape and are decorated with series of incised lines and circles. Each piece differs in decoration. Some of the teeth have a fibrous material on the inside. One has black fibre twine wrapped on the outside, another has a small piece of red fabric.

Carved model canoe with ten wooden paddles. The canoe is long and narrow with twelve wooden dividers and eleven benches inside. The ends of the canoe are raised; the pieces were made separately and attached to the canoe. The stern ends in a triangle with one added piece. The bow ends in tiny overhanging triangle with two added pieces. The inside of the canoe is blue with unpainted benches and dividers. The outside of the canoe is white and red. On both sides the name "Mermaid" and "Galiano B.C." are painted. The paddles are painted red, white and blue (parts b-k).

Painted grouse headdress with an attached protruding beak and a large opening under the beak. To either side of the opening are three carved sections, painted red, green and white. The cheek area is green with white dots along the edge and three half circles at the sides. The beak and area surrounding the eyes is brown. The eyes are white with round black centres. Two black arches extend over the eyes. There is a red band with white and black dots at the top of the headdress. Below the red band is a white band that dips in the centre. Twigs visible above the headdress are attached to the back of the mask with metal wire and fibres. (Similar to A8099).

Cotton backed with red wool and beaded on. The upper portion has a design that consists of an alternating yellow and green five-branched tree-like form with white, pink, and blue going upward along the middle. The lower portion has a similar green-tipped white seven-branched tree-like form with alternating yellow, green, and pink v-lines going upward along the middle. Curving upward from either bottom side, there is a blue line with a yellow flower at the upper corner end. The upper portion has a pale yellow, dark blue, and white border while the lower portion has a green and white border.

Brown double whistle that is rectangular in cross section and comes to a tapering end and is bound in two sections with green and brown twine, one near the wider end and one near the middle. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut rectangular hole nearby at either side. There is the number '3' carved above one hole.

Light brown and brown double whistle that is irregular in cross section due to warping and appearing not to fit properly while it is made of different kinds of wood. Comes to a tapering end and is bound in six sections with brown twine that are relatively equally spaced. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut natural triangular hole nearby on one side with two taper cut semi-oval holes at opposite corners on the other side.

Brown double reed whistle that is square in cross section and bound in four sections with brown string, two near each end and two near the middle. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut semi-oval hole that bulges outward nearby at either side.

Brown double reed whistle that is rectangular in cross section and comes to a tapering end and is bound in beige twine in two sections, one near each end. While the wider end is solid, there are two hollows through the smaller end where there is a taper cut round cornered rectangular hole nearby at either side with a smaller taper cut semi-oval hole at the opposite end. Made from cedar wood.