Stock piece of green jade. Fraser River 8 miles north of Lytton, B.C.* Fide donor GTE: Stock piece of jade of a green color veined in a lighter green. Found on the site of an old house, dug up when gardening, at a high bluff point where Stein Creek flows into the Frazer River [sic] some 8 miles north of Lytton, British Columbia. It shows several cutting grooves and polished faces along its entire length. Oblong jade cobble. Abouth 25% of surface appears to be rounded by natural agents. The remaining surface area consists of smooth linear abrasion scars interspersed with fracture scars. This is assumed to reflect removal of saw blades. *Information is from the original accession ledger.

Jade celt or chisel.* Fide donor GTE: Jade chisel, mottled black and green. Jade, serpentine and other tough, fine grained stones were used for making celts, chisels and adzes for all wood working and for cutting and dressing skins. Boulders cut in two, smoothed on one surface and grooved, are found on old village sites and camping places. These are most always of greenstone, of jade and serpentine. And when they occur in many flat worked pieces of a coarse silicious sandstone with one or more beveled edges which just fit the deeper grooves in the boulders which would seem to indicate very clearly that these were the knives or saws by means of which the boulders were cut in convenient sized pieces to be worked on: the slightly concave grindstones into tools. The people of the present day have little or no knowledge of this art or manufacture. The grooves show a convex a flat or a concave goove along the bottom but more often is the convex surface apparent. Some of the tools thus cut are finished throughout their length while others are rough splinters merely brought to a cutting edge. In most of the celts and chisels, one or more grooves are plainly visible where the section was cut from the stock piece. Greenstone was universally used for cutting tools and in the following catalogued specimens (2882-2898) the term jade is used to describe those that from their weight and hardness would appear to be of that mineral, although a chemical analysis would be necessary to determine their material structure. *Information is from the original accession ledger.

Jadeite adze blade, collected from Howard Site (45-MS-11) in 1949

Jade celt or chisel.* Fide donor GTE: Jade chisel, mottled green showing cutting grooves. Jade, serpentine and other tough, fine grained stones were used for making celts, chisels and adzes for all wood working and for cutting and dressing skins. Boulders cut in two, smoothed on one surface and grooved, are found on old village sites and camping places. These are most always of greenstone, of jade and serpentine. And when they occur in many flat worked pieces of a coarse silicious sandstone with one or more beveled edges which just fit the deeper grooves in the boulders which would seem to indicate very clearly that these were the knives or saws by means of which the boulders were cut in convenient sized pieces to be worked on: the slightly concave grindstones into tools. The people of the present day have little or no knowledge of this art or manufacture. The grooves show a convex a flat or a concave goove along the bottom but more often is the convex surface apparent. Some of the tools thus cut are finished throughout their length while others are rough splinters merely brought to a cutting edge. In most of the celts and chisels, one or more grooves are plainly visible where the section was cut from the stock piece. Greenstone was universally used for cutting tools and in the following catalogued specimens (2882-2898) the term jade is used to describe those that from their weight and hardness would appear to be of that mineral, although a chemical analysis would be necessary to determine their material structure. *Information is from the original accession ledger.

Jade adze imbedded in tree root. Locality: North bank of Chisholm Bay, Government Canal Locks, Seattle. Remarks: Found in an old camp site & shell heap, etc.* *Information is from the original accession ledger.

Jade celt or chisel.* Fide donor GTE: Jade chisel, whitish black, showing cutting grooves. Jade, serpentine and other tough, fine grained stones were used for making celts, chisels and adzes for all wood working and for cutting and dressing skins. Boulders cut in two, smoothed on one surface and grooved, are found on old village sites and camping places. These are most always of greenstone, of jade and serpentine. And when they occur in many flat worked pieces of a coarse silicious sandstone with one or more beveled edges which just fit the deeper grooves in the boulders which would seem to indicate very clearly that these were the knives or saws by means of which the boulders were cut in convenient sized pieces to be worked on: the slightly concave grindstones into tools. The people of the present day have little or no knowledge of this art or manufacture. The grooves show a convex a flat or a concave goove along the bottom but more often is the convex surface apparent. Some of the tools thus cut are finished throughout their length while others are rough splinters merely brought to a cutting edge. In most of the celts and chisels, one or more grooves are plainly visible where the section was cut from the stock piece. Greenstone was universally used for cutting tools and in the following catalogued specimens (2882-2898) the term jade is used to describe those that from their weight and hardness would appear to be of that mineral, although a chemical analysis would be necessary to determine their material structure. *Information is from the original accession ledger.

Jade knife.* Fide donor GTE: Portion of a jade knife. *Information is from the original accession ledger.

Jade celt.* Small, triangular adze blade. Probably a reworked fragment of a larger adze (6/95). *Information is from the original accession ledger.

Jade celt or chisel.* Fide donor GTE: Worked piece of jade, end of a knife or chisel. Jade, serpentine and other tough, fine grained stones were used for making celts, chisels and adzes for all wood working and for cutting and dressing skins. Boulders cut in two, smoothed on one surface and grooved, are found on old village sites and camping places. These are most always of greenstone, of jade and serpentine. And when they occur in many flat worked pieces of a coarse silicious sandstone with one or more beveled edges which just fit the deeper grooves in the boulders which would seem to indicate very clearly that these were the knives or saws by means of which the boulders were cut in convenient sized pieces to be worked on: the slightly concave grindstones into tools. The people of the present day have little or no knowledge of this art or manufacture. The grooves show a convex a flat or a concave goove along the bottom but more often is the convex surface apparent. Some of the tools thus cut are finished throughout their length while others are rough splinters merely brought to a cutting edge. In most of the celts and chisels, one or more grooves are plainly visible where the section was cut from the stock piece. Greenstone was universally used for cutting tools and in the following catalogued specimens (2882-2898) the term jade is used to describe those that from their weight and hardness would appear to be of that mineral, although a chemical analysis would be necessary to determine their material structure. *Information is from the original accession ledger.

Stone chisel of jade like stone. Jade celt or chisel.* Fide donor GTE: Black stone chisel from the lower Nicola valley near Numett. Jade, serpentine and other tough, fine grained stones were used for making celts, chisels and adzes for all wood working and for cutting and dressing skins. Boulders cut in two, smoothed on one surface and grooved, are found on old village sites and camping places. These are most always of greenstone, of jade and serpentine. And when they occur in many flat worked pieces of a coarse silicious sandstone with one or more beveled edges which just fit the deeper grooves in the boulders which would seem to indicate very clearly that these were the knives or saws by means of which the boulders were cut in convenient sized pieces to be worked on: the slightly concave grindstones into tools. The people of the present day have little or no knowledge of this art or manufacture. The grooves show a convex a flat or a concave goove along the bottom but more often is the convex surface apparent. Some of the tools thus cut are finished throughout their length while others are rough splinters merely brought to a cutting edge. In most of the celts and chisels, one or more grooves are plainly visible where the section was cut from the stock piece. Greenstone was universally used for cutting tools and in the following catalogued specimens (2882-2898) the term jade is used to describe those that from their weight and hardness would appear to be of that mineral, although a chemical analysis would be necessary to determine their material structure. *Information is from the original accession ledger.