A large, rectangular fish trap (Ghunni). The main body of the trap is made up of thin bamboo strips running parallel to one another, and stitched together with palm leaf. The palm leaf has been twisted together into thicker strands, and is woven perpendicular to the bamboo. The trap's frame is constructed from thicker pieces of bamboo. This includes the edges of the trap, as well as further reinforcement on the sides, top, and bottom. All sides of the trap are closed except for the front. The front of the trap is made from two pieces that have been angled inwards to form an inverted triangle. There is a gap between the two pieces which allows fish to swim through. Inside of the trap, just beyond this opening, are two flexible structures made of thin bamboo strips. The strips are woven together in rows using palm leaf. The structures are tied to both ends of the trap, and pointed inward to keep fish from swimming back out of the box.

A bamboo plunge trap used for catching fish. The trap is shaped like an inverted cone, with a narrow top and wide bottom. It has a thick, circular, wooden rim at the top. Bamboo strips are joined to the rim and extend downward, growing farther apart as the distance increases. Near the rim, there are two bamboo rings, one on the inside, and one on the outside of the trap. Metal wire is woven across both rings, securing the bamboo strips in between them. Four more bamboo rings are positioned inside of the trap, and secured to the bamboo strips by metal wire. The rings grow larger the farther they extend from the rim. Between the third and fourth bamboo rings, there is a thicker, darker, rounded ring secured in place by five bamboo wedges. At this point the trap bends more sharply, so that the bamboo strips are all parallel to one another as they reach the bottom of the trap. Near the bottom, a sixth, ring made of metal wire has been woven around the bamboo strips to further secure them. The end of each bamboo strip comes to a point.

A fishing basket [a] with lid [b] and rope [c]. The basket has a circular rim and square base. Very thin, flat strips of bamboo are woven across wider vertical strips to comprise the basket's main body. The weave is close, with only small gaps. The bottom of the basket is woven from wider bamboo strips, in a perpendicular fashion. Two thicker pieces of bamboo form an X-shaped base. The basket has four cylindrical feet, one at each corner. A thin strip extends from the base of each foot, and is woven into the basket so as to attach it. The rim of the basket is made from two larger, horizontal strips of bamboo that wrap all the way around. They are secured by groups of three thinner vertical strips staggered at 2-2.5 centimetre intervals. A circular piece of wood with a cut out centre is secured to the inner rim of the basket by four small nails. The top of the wood is covered with bamboo strips, which have been woven in a chevron pattern. The lid of the basket is small, flat, and circular in shape. It is made from a piece of wood, and is covered with bamboo strips which have been woven in a chevron pattern. The handle of the lid is a thin, straight block of bamboo with downward curved ends. It extends slightly past the base of the lid on both sides, and is secured through the bottom by three small nails. There is a small hole in one side of the handle. The lid was previously attached to the body of the basket via a braided, purple rope, however all three pieces are now separate. The basket and lid are both covered in a clear lacquer.

A short, cylindical, wooden fish spear with two sets of barbs. The spear is painted black and comes to a sharp point. Both sets of barbs are arranged in a triangular fashion around the shaft of the spear, in groups of three. The barbs are straight, with four sides, and point backwards in the direction of the spear's user. They are secured by wound string, also painted black. Wrapped around the middle of the spear is a white, rectangular piece of bark cloth. A design has been painted onto the cloth in black, and consists of circles and dots in a radiating pattern.

A fishing basket with a round rim and square base. The basket is woven from thin, flat strips of bamboo about half a centimetre wide. The strips are lighter in the centre and darker on the edges, and plaited in a diagonal, criss-crossing pattern which continues until the rim of the basket. The weave is open, with centimetre large gaps between the strips. The rim is braided from multiple strips, and approximately two centimetres wide. At the bottom centre of the basket, two thicker pieces of bamboo are crossed in an X shape. The rim of the basket is a braided band od the same

Woven conical hat with braided circular brim. Hat is done in four sections of tight weave with openwork in between each section. The first openwork band, made of "X" shaped designs, is bordered on either side with dyed dark purple grass. Top of hat is crowned with a tapering cylinder, with diagonal patterned openwork sides. Four interlocking loops overtop and around cylinder. Inside of the hat, there is a loosely woven band to fit on a head.

Large woven cedar bark basket. The basket has a square base and a large circular opening.

Large woven cedar bark basket. The basket has a square base and a large circular opening.

Dark reddish brown painted, wooden face mask. Face has an angular nose, slit-like eyes and protruding lips. Area surrounding eyes is sunken, carved teeth are small and pointed. Geometric motif incised on forehead, lines and ovals carved across cheeks, linear design along chin. Square-like ears on either side of face, with holes drilled through the lobes. Mask has holes for eyes, nose and mouth. A bulbous headpiece is carved above the face. Circles imprinted across sides, at intervals, and top. Headpiece has an additional woven component, attached to the upper back and sides. Woven headpiece is made of thickly braided fibre, shaped by an inner slat frame. Rectangular sections of knotted fibre protrude from the sides and top. Below the headpiece is an open-weave net made of plant fibre, that hangs down behind the wearer's head.

Opened out fragment of a tubular case. Golden brown textile worked over thin brown-black reeds. Four rows of designs across entire surface. Done in red, black, white, olive green and dark grey. First row has three small step designs with bordered squares inside them. Second row has a bird-like creature and other zoomorphic figures. Third and fourth rows have snake-like figures. Textile stitched to cream coloured fabric, secured to off-white matboard.