Pair of snowshoes (parts a-b) made of wooden frames with two curved crossbars. Babiche latticework between the frame and crossbars; latticework reinforced with plastic ties along frame. Shoes are rounded before tapering at the ends; shoes are flat. The frame consists of one piece of wood that has been bent into shape; ends are secured with nails below the front crossbar. Middle section of latticework is woven wider than front and back sections. Oval-shaped gaps in weave, underneath front crossbar, for feet; skin ties secured to sides of gaps. Decorative tufts of light blue, orange and dark purple wool are attached along the outer edges of frames, on front and back ends. Grooves cut into frame above wool decoration. The longer snowshoe (part b) has a knotted cord tied around the frame above the front crossbar, along the left side.

Ulu type knife. Metal blade is crescent-shaped with a beveled bottom edge. Blade held in place by bronze metal plates on both sides, that slot into the underside of the handle. Three copper nails have been hammered through the bronze plate into the blade to hold it in place, with the ends smoothed to blend with the bronze plate. The handle is a rectangular piece of horn, with a curved top edge. A hide cord is tied around centre of handle.

Male doll, in standing position, with a stone face. Eyes are incised; nose, mouth and full cheeks are carved in relief. Small holes in nose, imitating nostrils. Tattoos incised across face, consisting of an arrow, and linear, curvilinear and circular motifs. Body is carved out of whale bone. Seal fur attached throughout, imitating fur trimmed clothing. Male is wearing a hooded parka with a long flap, pants, mittens and boots. Hood covered in fox fur, face opening trimmed with deer fur. Artist inscription on stone tag tied to doll’s left hand.

Harpoon (part a) with a detachable head (part b). Harpoon has a cylindrical steel shaft inserted into a wider wooden handle. Ends of wood are capped with copper(?). Hide cord wrapped around bottom end in a loose spiral, before tightening into a thick band; hide acts as a handgrip. Second hide tie knotted around base of metal shaft. Top of shaft tapers to a point, for head to fit on. Harpoon head consists of an oval-shaped blade, with a sharp point, welded to a triangular holder. Long rope line strung through hole drilled into centre of holder, creating a large loop. Rope is secured together at intervals.

Small awl made of antler. Elongated shaft tapers to a point. Carved circular finial at the top. Awl has a natural curve, dipping in the middle.

Pair of boots made of wolf skin. Legs and vamps are covered in white fur, soles are light brown hide. On either side of the boot heels are two long hide ties, meant to be secured around the ankles. The top openings are edged with canvas-like material, through which is threaded a dark pink drawstring. Bottom edges of openings are trimmed with three decorative bands. Top rows have an alternating white and dark blue triangle motif; second are plain yellow; third are green with scalloped edges, with a shiny, gold-coloured diamond motif overtop. Interiors are unlined.

Harpoon (part a) with a detachable head (part b). Harpoon has a flat shaft, made of two pieces of antler riveted together, that narrows to a point. Shaft is inserted into a wider “V”-shaped piece of antler, riveted to a cylindrical wooden handle. Knife-shaped, antler blade secured to opposite end of handle with hide ties and copper nails. Hide strip woven through the bottom centre of wooden handle. Strip held close to handle with hide and rope ties. Harpoon head consists of an oval-shaped steel blade, with a sharp point, riveted to a triangular holder. Long hide strap strung through hole drilled into centre of holder. End of strap has a loop handle.

Pair of boots made of caribou skin. Legs and vamps are covered in a mix of brown and white fur, soles are light brown hide. On either side of the boot heels are two long hide ties, meant to be secured around the ankles. The top openings are edged with dark blue cloth, through which is threaded a white braided drawstring. Interiors are unlined.

Large, rectangular shaped moose hide, stretched and tide to a wooden frame. There are traces of fur along the edges where numerous holes have been cut for the rope to pass through. The corners of the frame are bound together by rope.