FROM CARD: "*DOUBLE ENTRY UNDER CAT. #569. "SQUARE FRAME; POINTED ENDS, SHARPLY CURVED UP IN FRONT. NETTING CLOSE & FINE, MADE OF FINE LINE, CUT FROM PREPARED DEERSKINS CALLED BABICHE; THE FOOT NETTING BEING WRAPPED AROUND FRAME AND COARSER THAN THE REST. ORNAMENTED W/ TUFTS OF WORSTED ON OUTSIDE OF FRAME. CHIPPEWAYAN MODEL, USED BY ESKIMO OF ARCTIC CST."

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/101 , retrieved 1-3-2020: Ivory harpoon head tipped with an iron blade. The harpoon head has a single set of paired barbs, and the iron blade also is barbed. The blade is secured in a slot in the harpoon head by two copper rivets that have been inserted at right angles to each other. More information here: http://www.inuvialuitlivinghistory.ca/item_types/30: Harpoons are used for hunting sea mammals such as seals and whales. They have a point, or 'head', that separates from the rest of the harpoon and remains attached to the quarry. A line running from the harpoon head is held by the hunter or attached to a float, allowing the animal or fish to be retrieved. Thrusting harpoons, used for hunting seals at breathing holes on the sea ice, generally have long foreshafts that swivel inside a socket piece attached to the harpoon shaft in order to release the harpoon head. Throwing harpoons used for hunting seals and whales in open water normally have foreshafts that are more securely fixed to the harpoon shaft. Both types are found in the MacFarlane Collection.

FROM CARD: "METAL BOWL."This object is listed, but not described or analyzed, in Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/100 , retrieved 1-24-2020. General information on pipes is available here: http://www.inuvialuitlivinghistory.ca/item_types/2: Inuvialuit first obtained pipes and tobacco in the 1800s through indigenous trade networks that stretched through Alaska and as far as Siberia. The MacFarlane Collection includes twenty pipes of this northern style. The bowls are made from metal, wood or stone, and with one exception the pipes have curved wooden stems split along their length and held together with a skin or sinew wrapping. Commonly a pick used for tamping tobacco and cleaning the bowl is attached to the pipe.

Records in the SI Archives of the Office of Distribution say this was sent to Chicago Academy in 1867 but apparently either this is incorrect or it was later returned to the MuseumE1107, line # 2 of 2 (line # 1 of 2 not described on website): Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/99 , retrieved 12-10-2019: Coiled line made from the hide of an unidentified animal. It is approximately 1 cm. wide and 5 metres in length. The coils have been tied with a smaller thong, also made from hide.

FROM CARD: "*DOUBLE ENTRY UNDER CAT. #625."

FROM CARD: "2 PAIRS. 2 PAIR FOUND WITH NO. 1730 -- L.L.L. 2/1976."Information for mittens pair # 1 of 2: Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/98 , retrieved 12-27-2019: A pair of mittens made of caribou hide. The pieces that form the palms and inner parts of the thumbs have had the hair removed. Strips of caribou hide are sewn around the cuffs and along horizontal seams where several pieces of hide are sewn together. More information here: http://www.inuvialuitlivinghistory.ca/item_types/41: Mittens with separate thumbs were used for keeping the hands warm in winter. They usually have the hair on the outside at the back of the mitten, which can be held against one's face to keep it warm. The mittens usually are quite short, as the fur trim on the sleeves of parkas protected the exposed wrist.

IDENTIFIED AS KUTCHIN TYPE BY JUDY THOMPSON, WESTERN SUBARCTIC CURATOR AT THE CANADIAN MUSEUM OF CIVILIZATION, 1999. FROM CARD: "BEADED, QUILLED, AND FRINGED SINEW SEWN. PART OF COSTUME INCLUDING NOS. 328766-69. BEAUTIFUL; WHITE COLOR. ILLUS. IN THE FAR NORTH CATALOG, NAT. GALL. OF ART, 1973, P. 148 [attributed as Kutchin in publication]." MATERIALS: WHITE CARIBOU HIDE, PORCUPINE QUILLS, SILVER WILLOW SEEDS, SINEW.Clothing set E328766, E328767, and E328768 is illus. Fig. 8, p. 53 in Thompson, Judy, 1999, "Marketing Tradition: Late Nineteenth-Century Gwich'in Clothing Ensembles," American Indian Art Magazine, 24(4). Identified there: "Clothing ensemble comprised of a tunic, moccasin-trousers and hood, Gwich'in type. White caribou hide, porcupine quills, sinew and silver willow seeds. Collected by Bernard Ross, 1860. The breast band and front above the breast band are decorated with bands of loom-woven quillwork; the wrists of the tunic and the moccasin-trousers adn hood are decorated with folded quills ...."

FROM CARD: "ILLUS.: THE SPIRIT SINGS. CATALOGUE, GLENBOW-ALBERTA INST., 1987, #A73, P. 127."1 ARROW LENT TO PRINCE OF WALES NORTHERN HERITAGE CENTER, JUNE, 1992. LOAN GLENBOW NOV 13 1987. LOAN RETURNED NO 25 1988. LOAN RETURNED: DEC 21 1992."Note re photos: Neg. # 2003-5856 is detail shot of barbed steel head of 1 arrow.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/97 , retrieved 1-17-2020: Crooked knife with an iron blade attached to an antler handle with two iron rivets. One face of the handle where it is joined to the blade is curved and has an indentation to provide a grip for the thumb when held in the right hand. The handle is decorated on the same face with an incised line. A hide thong has been wrapped around the handle to improve the grip. A hole drilled through the handle at one end may have been intended to hold a thong for hanging this tool. More information here: http://www.inuvialuitlivinghistory.ca/item_types/18: Crooked knives were used for shaping wood, bone and antler. The Inuvialuit style of crooked knife has a small blade attached near the end of a curved handle. The knife is held with the fingers of one hand on the underside of the handle, and the thumb positioned on top of the blade in an indentation in the handle. The craftsman rests the underside of the blade against the object being worked, and draws the knife towards the body while using the thumb on the hand holding the tool to check the depth of the cut.

Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/96 , retrieved 1-8-2020: Saw with an iron blade hafted to a handle made of antler. The blade is rectangular, and has teeth that are only slightly raised along the cutting edge. The blade is attached to the handle by two rivets. One edge of the handle has three wide, shallow notches that provide a secure grip. More information here: http://www.inuvialuitlivinghistory.ca/item_types/49: Saws for cutting wood, bone, antler and ivory had thin metal blades attached to bone handles. Shallow notches in the saw blades were made by striking the edge with the thicker blade of a knife.