Woven silk ikat fabric. The edge of the textile is a solid pinkish red, thinner along the sides, and wide on the ends. The centre is filled with various motifs, geometric designs, and animals (fish, birds). There are four thin pink, yellow and grey striped bands running horizontally across the textile on either end, with three bands of diamond designs within. Top and bottom bands have same diamond designs, central design is different. A small 'Renewal Cambodian Tradition' paper tag is sewn to the top right corner, with a small yellow tag sewn to the same corner, reverse side. Another small handwritten tag is sewn to top left corner.

Small plastic packet with nine thimble-shaped halves of yellow silkworm cocoon. The paper insert is printed with 'Cambodian Silk Worm', 'Made in Cambodia' and more information.

Hand-made artificial limb. The thigh-height leg is made of two pieces of wood. The top piece accommodates the wearer’s own thigh, and is wider at top, narrowing toward the knee. A long strip of fabric is wound around the top for tightening. Interwoven are pieces of black rubber and a thin piece of cord. Part of the thigh piece has been hammered into place to repair a hole. Beneath is attached the leg bottom, a long, narrower piece of wood with a flat base.

Hand-made artificial limb. The knee height leg is constructed of wood, rubber and metal. The limb is made of a single piece of wood carved into a cylinder wider at top and narrowing toward the ankle. The cylinder is sliced in half from top down to ankle, allowing it to be adjusted in size. The artificial limb is attached to the wearer’s leg by an encircling piece of wire that is twisted using a short wooden rod to tighten and close the slats. A small rubber plate is attached at bottom by nails for a foot. A fabric handle is attached to the leg at top and ankle.

Hand-made artificial limb. The knee height leg is constructed of wood, rubber and metal. The limb is made of a single piece of wood carved into a cylinder wider at top and narrowing toward the ankle. The cylinder is sliced in half from top down to ankle, allowing it to be adjusted in size. The slats are held in place by a wire at the ankle and a circle of metal at the top holding a piece of wire that is tightened to close the slats. A fabric handle, tan in colour with a green edge, is connected to the encircling metal. The foot is made of rubber and attached to the leg by nails and has a wooden toe-piece.

Hand-made artificial limb. Made from a single piece of wood carved into a thigh height leg, wide at the thigh and narrowing toward the ankle, with a discernible knee. The thigh is hollowed out to the knee. A short blunted foot is carved at bottom, with a pad of rubber attached to back and bottom. Leather thongs are wrapped around the ankle and upper thigh, where a piece of leather protrudes holding a system for buckling that includes two metal rings.

Hand-made artificial limb. Made from a single piece of wood that was carved into a thigh height leg, wide at the thigh and narrowing toward the ankle, with a discernible knee. The thigh is hollowed out to the knee. A thick, oblong piece of rubber serves as a foot and is attached to the base of the leg with nails. There are no articulations in the limb. Part b is a large portion of the top of the thigh that has broken off.

The sarong is a purple-red cloth with yellow, pink and fuchsia detail. There are bands of pointed line of varying sizes, alternating fuchsia and pink. Along each edge there is a broken yellow line. The cloth is folded in half and the ends machine stitched together.

Rectangular woven ikat fabric; predominantly shiny, rich purple and crimson hues. All-over geometric patterning with diamond-shaped motifs in red, orange-yellow, and blue and a dark purple ground. Bands of red along the lengthwise edges. Four thick stripes alternating with three thin bands of patterning at either end.

Miniature cast metal drum with a three-pronged supporting base.