Arrow Item Number: A2172 from the MOA: University of British Columbia
Arrow consisting of a long cylindrical wooden shaft with one notched end and a copper point at the other, secured with wrapped sinew. The metal point has three notches near its base, above the long fore-shaft. The point is set into a circular depression in the wooden shaft and secured with sinew which is wrapped around the shaft. The shaft has red-coloured pigment at its opposite end. Two strips of a grey and white feather are hafted to the same end of the arrow, also with sinew. The base end of the arrow shaft is damaged and slightly jagged in appearance.
The bow was used as the primary weapon for hunting land animals. Arrows were specialized for hunting animals or birds. Arrows used for bird hunting had "a hardwood knob or a fiber wrapping at the end of the shaft (Barnett 1955:102)." While a very common shape for other types of arrows was a " point [that] was five or six inches long. Both for hunting and warfare, it was set into a slot in the blunt, untapered end of the shaft in such a way that, when the victim was pierced, the shaft dropped off and the point remained in the wound (1955:102)." Wilson Duff reports that arrows of bone and ground stone were traditionally used by the Sto:lo for hunting, while those of chipped stone were used for war. He adds that the war point were sometimes poisoned by dipping them in the human brain (see 1952:59).
hunting; warfare
This arrow was found in a shell heap near New Westminster, with four others, probably between 1920-1927.
Wilson Duff reported that the Sto:lo made arrows from serviceberry wood, and that "some persons used small round sprouts, but deer hunters used larger and tougher stems split into four and rounded. The point of the arrow was charred and sharpened, and this sufficed for a point in most cases. Sometimes, however, points were made of ground slate...[also] of bone, ground stone, and chipped stone... Arrows were feathered with the whole tail feathers of mallard ducks or woodpeckers. Two feathers were used, laid on tangentially opposite each other. The feather was laid on the arrow, quill-end toward the butt, and the end of the vane was tied to the arrow with deer sinew. The quill-end was brought forward and tied down forward of the previous lashing. Sometimes it was given a half-twist to impart a rotary motion to the arrow in flight" (from The Upper Stalo Indians. 1952:59).